圓鋼切斷機近年來逐步被機械加工和小型軋鋼廠等廣泛采用,在國民經濟建設的各個領域發揮了重要的作用.而且圓鋼切斷機重量輕、耗能少、工作可靠、效率高等特點,主要用于房屋建筑、橋梁、隧道、電站、大型水利等工程中.那么對于圓鋼切斷機有哪些檢查規定呢?下面小編給大家介紹下.

In recent years, the round steel cutter has been widely used in mechanical processing and small-scale rolling mill, which has played an important role in various fields of national economic construction. Moreover, the round steel cutter is characterized by light weight, less energy consumption, reliable operation and high efficiency, and is mainly used in housing construction, bridge, tunnel, power station, large-scale water conservancy and other projects. What are the inspection regulations for the round steel cutter? Let's introduce it to you.

1、圓鋼切斷機傳動機構應運轉平穩,不應有異響,曲軸、連桿不應有裂紋、扭曲;

1. The driving mechanism of the round steel cutter shall operate smoothly without abnormal noise, and the crankshaft and connecting rod shall not be cracked or twisted;

2、開式傳動齒輪齒面不應有裂紋、點蝕和變形,嚙合應良好,磨損量不應超過齒厚的百分之二十五,滑動軸承不應有刮傷、燒蝕,徑向磨損不應大于0.5mm;

2. The tooth surface of the open transmission gear shall be free of cracks, pitting and deformation, the meshing shall be good, the wear amount shall not exceed 25% of the tooth thickness, the sliding bearing shall not be scratched or ablated, and the radial wear shall not be greater than 0.5mm;

3、滑塊與導軌縱向游動間隙應小于0.5mm,橫向間隙應小于0.2mm;

3. The longitudinal traveling clearance between sliding block and guide rail shall be less than 0.5mm, and the transverse clearance shall be less than 0.2mm;

4、刀具安裝牢固不應松動;刀口不應有缺損、裂紋,襯刀和沖切間隙應正常.

4. The cutter shall be installed firmly without looseness; the knife edge shall be free of defects and cracks, and the clearance between the lining cutter and punching shall be normal.

在使用圓鋼切斷機的時候要注意,運轉中,嚴禁用手直接清除切刀附近的斷頭和雜物.鋼筋擺動周圍和切刀周圍,不得停留非操作人員.

When using the round steel cutter, it should be noted that during operation, it is strictly prohibited to directly remove the broken ends and sundries near the cutter by hand. It is not allowed to stop non operators around the swinging of the reinforcement and the cutter.

作為機器設備,一定要注意平時的保養和維護工作,從而延長圓鋼切斷機的使用壽命,減少機器損壞給自己造成不必要的損失.以上就是關于圓鋼切斷機的一些檢查規定,希望可以幫助到大家.

As a machine and equipment, we must pay attention to the usual maintenance and repair work, so as to extend the service life of the round steel cutter and reduce the unnecessary losses caused by the machine damage. The above are some inspection regulations on the round steel cutter, hoping to help you. Http://lala-tm.com